upgrading axon ax 100 mkII

andraxe · **Joined:** 24.02.2010 09:50 **Posts:** 6

hi everyone
i just bought my axon 100 mkII with 7.10 firmware but im a little bit afraid to update to 7.28
becouse i don t want to have a dead eprom!!!!
or some other problem
wath i have to do if the process fails to upload correctly? will i have to change the eprom?
do some of you know what kind of eprom is mounted on axon?
why do i have to reprogram the eprom outside the unit?
thanks in advance

Nik · **Posted:** 26.02.2010 16:45

You will not have to change the EPROM or program it outside the unit.
For just a few people the upgrade does not work. Usually, the problem is their MIDI interface or drivers. If the problem is solved, then the Axon can be upgraded successfully.

andraxe · **Joined:** 24.02.2010 09:50 **Posts:** 6

sorry for private message
i don t understand this
"You will not have to change the EPROM or program it outside the unit"
but if it fails or have some error in reprogrammig can i reprogram inside my unit? or do i have to program it outside?
do axon always permit to go in update mode?

Nik · **Posted:** 27.02.2010 00:37

andraxe wrote:

do axon always permit to go in update mode?

Yes.

upgrading axon ax 100 mkII

Who is online